Pages

Sunday, June 10, 2012

Creating a Gravel Parking Pad

When we decided that we wanted to have a nice gravel parking pad, instead of a dirty, uneven, weed covered parking area off of our back lane, I had a number of questions, like where does a person buy gravel anyways? Not to mention how much do we need, what does it cost, and how do we get it home?

One reason we chose to put in a gravel parking pad, rather than paving, is that using a permeable surface for parking is more eco-friendly, since it reduces run-off. In case you're considering this relatively cheap but high-impact project, I will share some of my new-found insights here, along with some photos of our project. This is a before picture from when we were building the fence. (There were a lot less weeds then.)

We decided to put landscaping fabric down underneath the gravel to crush the existing weeds, and prevent more weeds from growing up through it. If you do this (particularly on a windy day), be sure to have lots of rocks, or better yet (as we discovered) some 2x4's on hand to weigh down the fabric until the gravel arrives.

When I was trying to figure out what type of stores I should be calling to compare prices on gravel, it seemed to me that in the old days, one would have just looked up "gravel" in the yellow pages. So, I tried it (on yellowpages.com, that is). This didn't turn up many places that looked promising to me, but it did set me on the path of the "building supply" store. That, my friends, is where you buy gravel.

Google maps led me to a number of building supply stores close to home (which, I reasoned, would make delivery cheaper). Now I know there are some hard core DIY'ers out there thinking to yourselves "Delivery, bah! I'll just pick up the gravel myself, shovel it into the back of my hatchback, and drive it home in a few small loads." (Okay, I'll admit it, I considered this.) Don't do it. Gravel is heavy. Really heavy. And the amount you will need is more than you think (I'll get to that in a minute). So if you can't avoid the delivery fee, how else can you save money on gravel?

James and the dump truck.

The best way to save money on gravel is to call around and ask about the cost of gravel (usually given per cubic yard), and also about the cost of delivery. I called five building supply stores. The cost of the gravel ranged from $37 to $50 per cubic yard, and the cost of delivery was between $25 and $70. So you can see that it is well worth taking the time to shop around. Fortunately for us, the place with the cheapest gravel also had the cheapest delivery, so calling around really did save us a bundle.

So, how many cubic yards do you need? I asked a number of people, both family friends with experience in this area, and the people at the building supply stores. The conclusion that I have come to is that, as a general rule, 1 cubic yard per 100 square feet that you want to cover is about right. If the ground that you are putting the gravel on is not very compacted, or if there is room for the gravel to spread at the edges (which there wasn't in our case), you might need a bit more. We got 4 cubic yards, and it was a big pile! Here it is:


Our other big tip for you, given our experience raking and shoveling the gravel to convert it from a giant pile of rocks into a nice, even parking area, is to have the dump truck dump it in the middle (rather than at the edge) of the area that you plan to cover with gravel. That way you can spread it out from the middle in all 4 directions, instead of having to spread it a farther distance in only 3 directions, like we did. Also, wear sunscreen and drink plenty of water.



And voila, a dazzling new parking area that's eco-friendly too!

Sunday, May 27, 2012

Household Hints: How to get more juice from a lemon

Especially during the winter, lemons can be expensive. Here are a couple of tips that will help you get more juice from a lemon.



- Warm your lemon up in the microwave before cutting it in half to get more juice.
- Roll your lemon on the counter, applying pressure with the palm of your hand will also loosen up the juice inside.
- If you just need a little lemon juice, poke a hole in the lemon with a toothpick, squeeze out the juice that you need, and put the toothpick back in to plug the hole. This will keep the lemon fresh and ready to use again.
- If you're serving a family, or having guests, wrap half a lemon with cheesecloth and bring it to the table face down on a small plate. Each guest can squeeze the juice he or she needs from the lemon, put it back on the plate, and pass it along to the next guest. The cheesecloth will prevent the juice from squirting anyone across the table, and keep the seeds from falling into your food. If you don't use it up, simply put the plate and the lemon in the fridge and use it at your next meal. You can use any type of porous cloth you wish. Try coloured cloths or tie the corners together with a ribbon for extra decorative flair, your guests will be impressed!

Do you have any other lemon-related tips to share?


Friday, May 25, 2012

Ode to the Mini-Crow Bar

Of all of my tools, the mini-crow bar is my very favourite.Why, you ask? Well, there are a number of reasons. It's diminutive size and elegant shape make it cute and endearing, but it is also strong and powerful.

My particular affinity for demolition (see my description of ripping up the floor in the guest room here for an example), and the mini-crow bar's aptitude for it doesn't hurt either. It's wonderful for demolition, but it's great for other practical reasons as well. 

I can use the mini-crow bar in place of a variety of other tools when I'm working on a project and can't remember where I've put them down. I have used it to remove nails, as you would the claw end of a hammer, as a pry-bar, to open a can of paint (although there are better tools for that which are also quite versatile), as a chisel (by hammering on the curved part). Not only that, it can be used in tight spaces like closets, it fits nicely into my tool bag and it isn't nearly as heavy as a full sized crow bar would be.

Mini-crow bar FTW!

Wednesday, May 23, 2012

Why is Breakfast Cereal so Expensive? or How to Make Granola

Today's blog post is brought to you by Rocky and Bullwinkle. Well, not really, but The Rocky and Bullwinkle Show inspired this post's disjunctive title. Do you remember the show's great episode titles like "Lion in the Bedroom or The Cat’s Pajamas"? I sure do! And now on to the real post!

Although most of my blog posts so far have been about home improvement, One Canadian Home is intended to be a do-it-yourself blog in the fullest way possible. James and I are very interested in doing and making whatever things we can around our home for a couple of reasons. Saving money is a big part of our motivation, but we're also interested in learning how to do a wide variety of different things, like our grandparents did. We also strive to be eco-friendly, and this is often easier to do if you buy ingredients instead of finished products. Since this is a post about granola, not about why we want to do as much as we can ourselves, and I've already gone off on a tangent about Rocky and Bullwinkle, I won't digress further, but hopefully you get what we're after, and maybe you'll read along and join the conversation in the comments.

Breakfast cereal is incredibly expensive, especially for what it is. Mostly wheat or oats or corn, all of which are very cheap. It's easy to pay on the order of $5 for a box of cereal, depending on the size of the box, and even the generic brands (which I find don't usually taste as good) are pretty pricey. So, I've been looking for alternatives to breakfast cereal.

My first attempt at making breakfast cereal will be making granola, although in researching the topic I also came across a recipe for home made bran flakes that I really want to try. When I do, I will post about it. I found a couple of granola recipes online, but I also remembered that my friend Kate used to make granola, so I got in touch and asked her for her recipe. In the end, I decided to try Kate's recipe first since it didn't have any ingredients that seemed too hard to find (and some which can be substituted), and wasn't full of coconut, which I don't really like. I also know that she's been making granola this way for years, so I figure it's probably good!

Here it is:

5 cups oats (or 4 cups oats and 1 cup rice puffs)
1 cup cashews or almonds
1 cup sunflower seeds
2/3 cup tahini
2/3 cup concentrated apple (or other) juice (from frozen)
chopped dried fruit: papaya, apricot, cranberries, raisins, etc.

Mix everything except fruit in a large baking pan such as a lasagna pan. Bake 60 minutes at about 275F, stirring every 20 minutes. Add fruit 20 minutes from end (ie at the second stir). Stir immediately upon removal from oven to make clean-up easier.

We usually use two baking pans and make double this recipe which also makes the amount of juice more closely match a standard frozen can. You can substitute other sugars for the fruit juice. Oil can replace some or all of the tahini.

Thanks, Kate!

For my first batch I used oats (no rice puffs), almonds, dried mangos and dried apples. Instead of the juice I used apple sauce, since that's what I had on hand. Since apple sauce is less liquid than apple juice, I added a little canola oil too.

After trying it, I decided that I wanted raisins in it as well, for a little extra sweetness, so I added them after the fact which seems to work just fine. This delicious granola is now stored in a canister on my counter, and I serve myself two handfuls with milk for breakfast almost every morning. Since there are so many variations, I'm sure each batch will be different and interesting, too.

Next up, how to make my own chai tea to go with it. Let me know if you have a recipe!

Makeover: Transforming our Guest Bedroom into a Vacation Hideaway

Welcome to the first post in a (likely to be long) series of room makeover posts. Since the people who owned our house before us were elderly, and had lived in the house for 36 years, I'm sure you can imagine that it needs a little updating. First up, the guest bedroom.


Here is the before picture, taken by the folks at Homes in Motion (used here with kind permission from them) who were hired by the previous owners for the purpose of selling the house. Did you notice the rug? We didn't, until the previous owners removed their furniture and we saw what terrible shape the floor was in underneath it.

As post-home-purchase surprises go, this was not a bad one. The floor was structurally sound and all, it's just that the stick-down vinyl tiles were probably stuck down thirty-odd years ago, and they were all peeling up around the edges. This was a mixed blessing, since although the floor needed to be re-done, the old tiles came off really easily.

Because of this floor our new guest room was in worse shape than any other room, so we decided that (besides painting) replacing the floor had to be our first big project in the new house. And, since I started ripping the tiles off the floor as soon as we had made that decision, there was no looking back.

With the help of a putty knife and some determination, I ripped out the old floor, and my good friends chisel and mini-crow bar (featured here) came in very handy for removing the baseboards (learn how to do that here). I really like doing demolition, and ripping the tiles off the floor was actually incredibly therapeutic. Check out what the room looked like at that point:
As you can see, we had already started spackling the cracks around the window (check out my spackling tips) and painting the trim in the room at this point.

Next up was closet demolition. The closet had built-in shelves that were clearly installed eons ago, and never removed (not even when the room was painted). Each shelf had four legs, and each leg was attached to the shelf with one nail, so the shelves were not very stable. We decided that our best bet was to dismantle the shelves, and hold off on deciding whether to paint and reinstall them, or use the wood for some other project.

There is something great, I think, about getting a peek at the history of a room when you're renovating. In particular, I love to see what colours a room has been painted (or what wall paper has been put up) in the past. Interestingly, it seems like much of our house was, at one time, painted sea foam green (I hope not all at once!). Here's what we saw when we took the built-in shelves out of the closet.

As you can see from the next photo, the painting was well underway at this point. In fact, we had completed one coat on all of the walls. We were originally thinking that we would do all of the painting before we installed the new floor, but before we started on the floor we asked for advice from my Aunt Lori, who has lots of experience installing floors (once word got out that she knew how, it seemed that every friend and neighbour had a new floor just waiting to be installed). She suggested that since it's easy to clean paint off of a laminate floor, and not so easy to touch up the paint if we scuffed the walls in the process of laying down the floor, we should save the second coat of paint until after the floor was finished. (You can read about laying the floor here, here and here - it was a big job!) Here is a photo of the new floor in the process of being laid down.

Once the floor was laid, it was time to put the baseboards back on. But we just couldn't do it. The rest of the room was so beautiful and clean and new looking, and the baseboards were encrusted with yellowing varnish, and dripped with paint from years gone by. So we embarked on the very time-consuming task of sanding down the baseboards. (Well, we did cheat a little and paint the baseboards in the closet, since it hardly seemed worth the effort to sand those ones.)

Once we got started, there was no going back, so we were very glad to discover that under all that yucky varnish the baseboards were made of beautiful oak! We decided to invest $30 in a power sander, which made the job go a lot more quickly, and before long we had sanded, oiled (use mineral oil from the pharmacy) and replaced our beautiful new baseboards.

Then we installed a new pole (rod?) in the closet to hang clothes from (post about how to do that to follow), and a shelf above it. We used two cup hooks and an old curtain rod we had hanging around to hang the curtains. Incidentally, I made these curtains for James' bedroom in his apartment in Austin way back when we were first dating, and thanks to my grandmother Gloria's wise counsel, I never get rid of curtains. 

As for the furniture, we put in a double bed, instead of the single bed that you see in the "Before" photo, but I still think that the room looks bigger now. We're still on the lookout for an inexpensive (or free?) bed frame for it. 


We found the bookshelf on the side of the road (and it's in great shape!). I re-painted the little white bedside table, which sat beside my bed at my parents' house for as long as I can remember (and may have been in my aunt or my mum's childhood room before that). The mirror in the guest room also came from my childhood room, and my mother painted the painting that's hanging above the head of the bed.


And there you have it, our brand new guest room, which we now out to tourists and business travellers through AirBnB. It's very quiet because it overlooks the back yard, and comes with a lovely view of the garden.

If you went on vacation to another city, would you like to stay in a room like this? Would you mind having a dog like Asta around? What do you do to feel more at home when you're travelling?




Tuesday, May 22, 2012

How to remove a broken light bulb from a lamp (or other fixture)

So you've found, scrounged, thrifted or been gifted a great new (to you) lamp, but there's a problem that spray paint can't solve. It has a broken bulb stuck in the fixture! 

Your first instinct may be to grab a pair of work gloves and unscrew it with them on to avoid cutting yourself, but beware of trying this solution, because if you break off the glass part of the bulb in the process, it will be much more difficult to get the bulb unscrewed.

The best solution is to get a potato that's just a bit larger than the remaining bulb parts (any type will do--it's best not to eat it afterwards anyways). Cut off one end so that you have a flat, skinless surface to work with.

Unplug the lamp, and then, holding with the cut end of the potato towards the base of the bulb, slowly but firmly impale the potato on the broken bulb, like this:

Once the potato is firmly in place, you can turn it (lefty loosey, of course) and the base of the bulb will turn with it, unscrewing the bulb from the lamp.

Put in a new bulb (of course you'll be using a super efficient compact fluorescent, right?) And voila, you have a lovely new lamp!



This beautiful lamp came to us courtesy of James' Aunt Sue!

Sunday, May 20, 2012

Choosing the Right Paint Can Opener

There are two main kinds of paint can openers that are available. There are the ones with the plastic handle, like this: 
and there are the all metal ones with a loop at one end, and the opener at the other end. In my experience the plastic-handled ones cost about $1.49, and the metal ones cost about $0.49. Price aside, there is one good reason to prefer the metal ones to the plastic ones, and that is that the loop end is a bottle opener, and as James says, "Nothing goes together better than painting and beer."